Splicing and Making Up Service
This setup is ideal for mooring, lifting, or load distribution applications in marine and industrial environments.
Our Making Up Service.
In this example, the entire length of the riser is covered in a wear sleeve, and the eyes are also sleeved to prevent abrasion where it matters most. The rope itself is heat-sealed after splicing to maintain integrity and resist untwisting or degradation.
The examle Polysteel rope, (tiger rope) is a high-strength, low-stretch material known for its excellent durability and resistance to saltwater, UV exposure, and rough handling.
The examle Polysteel rope, (tiger rope) is a high-strength, low-stretch material known for its excellent durability and resistance to saltwater, UV exposure, and rough handling.
Polysteel Riser with Steel Eyes and Wear Sleeves This riser is constructed from 36mm diameter fully stranded polysteel rope, known for its strength, durability, and resistance to harsh marine conditions.
Each end is finished with a hot-spliced and sealed eye, fitted with 150mm outer diameter steel rings (22mm thick), offering secure, load-bearing connection points.
Each end is finished with a hot-spliced and sealed eye, fitted with 150mm outer diameter steel rings (22mm thick), offering secure, load-bearing connection points.
Made to order - Ask about lead times.
Because of its robustness and reliable performance, it's a go-to solution for marine engineers, harbour authorities, dredging operations, and coastal infrastructure projects.
For traceability, stock control, or on-site identification, the rope can be easily blackened or marked to suit your operational needs.
We’re here to help. Made up to your requirements, with advice on all use cases.
If you need advice on choosing the right mooring riser for your setup, our team can guide you through the options to ensure a safe, reliable solution tailored to your vessel and conditions.